HP (Hewlett-Packard) D8C24UT#ABA ユーザーズマニュアル

Prepare the computer for disassembly (

Remove the computer access panel (

Remove the front bezel (

).

If you are installing a drive in a bay covered by a bezel blank, remove the bezel blank. See 

 for more information.

Install four M3 metric guide screws in the lower holes on each side of the drive (1). HP has
provided four extra M3 metric guide screws on the 5.25-inch drive bracket under the access
panel. The M3 metric guide screws are black. Refer to 

 for an

illustration of the extra M3 metric guide screws location.

When replacing the drive, transfer the four M3 metric guide screws from the old drive to

the new one.

Use only 5-mm long screws as guide screws. Longer screws can damage the

internal components of the drive.

  Installing a 5.25-Inch Drive in a Minitower (top) and Desktop (bottom)

Drives

97