HP (Hewlett-Packard) D8C24UT#ABA ユーザーズマニュアル
Hood Sensor
Description
Spare part number
Hood sensor
638816-001
The hood sensor is attached in a slot in the rear of the chassis.
1.
Prepare the computer for disassembly (
).
2.
Remove the access panel (
).
3.
Unplug the sensor cable from the system board connector labeled HSENSE (1).
4.
Slide the hood sensor straight out of the notch in the chassis (2).
NOTE:
A flat blade screwdriver can be used to push the hood sensor out of the slot.
Figure 8-31
Removing the hood sensor from the chassis fan
To install the hood sensor, reverse the removal procedure.
Hood Sensor 193