HP (Hewlett-Packard) D8C24UT#ABA ユーザーズマニュアル
Optical Drive Rail
Description
Spare part number
Optical drive rail (green plastic piece on drive)
594219-001
The optical drive rail sits behind the USB ports on the front of the chassis.
1.
Prepare the computer for disassembly (
).
2.
Remove the computer access panel (
3.
).
4.
Remove the hard drive (
).
5.
Remove the two Torx screws that secure the rail to the chassis (1), lift the tab (2) on the rail,
slide the rail toward the rear of the unit (3), and then pull the rail up and out of the chassis.
slide the rail toward the rear of the unit (3), and then pull the rail up and out of the chassis.
Figure 9-21
Removing the optical drive rail
To install the optical drive rail, reverse the removal procedures.
Optical Drive Rail 227