HP (Hewlett-Packard) D8C24UT#ABA ユーザーズマニュアル
10.
From the inside of the chassis, slide the fan out from underneath the chassis lip, and then
remove the fan.
remove the fan.
Figure 9-38
Removing the rear fan
To install the rear fan, reverse the removal procedure.
Antennas
Description
Spare part number
Antenna Hardware Kit
646811-001
Two antennas are secured to chassis – one on the front, one on the back. You must remove all other
components to remove the antennas.
components to remove the antennas.
1.
Prepare the computer for disassembly (
).
2.
Remove the computer access panel (
3.
).
4.
Remove the front fan (
).
5.
Remove the hard drive (
).
6.
7.
Remove the heat sink (
8.
Remove the system board (
9.
Remove the rear fan (
).
244 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis