HP (Hewlett-Packard) LK667LTABM ユーザーズマニュアル
Stand
The stand is secured with three screws.
To remove the stand:
1.
Prepare the computer for disassembly (see
2.
Position the computer with the rear facing you.
3.
Remove the small rear cover (see
4.
Remove the three Torx screws (1) that secure the stand to the computer.
5.
Slide the stand toward the top of the computer (2), and then lift it off the computer.
Figure 7-2
Removing the stand
To replace the stand, reverse the removal procedures.
Stand
29