HP (Hewlett-Packard) LK667LTABM ユーザーズマニュアル
Rear Cover
The rear cover is secured with five screws. You must pry it off at the seams around the edges of the
computer, starting at the bottom.
computer, starting at the bottom.
To remove the rear coverl:
1.
2.
Position the computer with the top rear facing you.
3.
Remove the small rear cover (see
4.
Remove the stand (see
).
5.
Remove the right rear cover (see
).
6.
Remove the heat sink (see
7.
Remove the upper cover (if not yet removed) by removing the two screws (1) that secure the
cover to the computer, and then rotating the cover up and off the computer (2).
cover to the computer, and then rotating the cover up and off the computer (2).
Figure 7-19
Removing the upper cover
8.
Remove the five screws(1) that secure the rear cover to the computer.
46
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis