HP (Hewlett-Packard) C5J37AWABA ユーザーズマニュアル
Front bezel
The front bezel is located on the front of the computer and is secured to the main system bracket with
eight Torx screws.
eight Torx screws.
Replacement bezels include the webcam shutter and capacitive sensor board. On models that do not
include a webcam, you must remove the shutter and install the webcam insert (Webcam assembly
kit) into the slot in which the webcam would otherwise be installed.
include a webcam, you must remove the shutter and install the webcam insert (Webcam assembly
kit) into the slot in which the webcam would otherwise be installed.
To remove the front bezel:
1.
2.
Remove the access panel (see
).
3.
Remove the stand (see
).
4.
).
5.
Remove the optical drive (see
6.
Remove the metal plate (see
).
7.
Remove the power supply (see
).
8.
Remove the side panels (see
).
9.
Remove the speakers (see
).
10.
11.
Lift the bracket from the bottom-left side of the computer.
Figure 6-78
Removing the bracket
92
Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis