HP (Hewlett-Packard) C5J37AWABA ユーザーズマニュアル
Hard drive and optical drive cables and connectors
The hard drive and optical drive connectors are located near the middle of the computer, partially
under the main display bracket. Each connector is secured with two Torx screws and has two cables
that connect to the system board.
under the main display bracket. Each connector is secured with two Torx screws and has two cables
that connect to the system board.
The optical drive connector cables are longer than the hard drive connector cables.
Figure 6-93
Hard drive cable and optical drive cable location
To remove the hard drive or optical drive connector:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
).
3.
).
4.
Remove the lower panel (see
).
5.
Remove the side panels (see
).
6.
Remove the metal plate (see
).
7.
Remove the power supply (see
).
8.
Remove the system board (see
).
9.
).
10.
Remove the display panel (see
11.
Remove two Torx screws that secure the hard drive connector or the optical drive connector to
the computer.
the computer.
12.
Remove the cables from the metal clips built into the computer.
Hard drive and optical drive cables and connectors 105