HP (Hewlett-Packard) DV3 ユーザーズマニュアル

The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows® operating system is not working.

The fingerprint reader (select models only) cannot be used to access the Setup Utility.

The utility reports information about the computer and provides settings for startup, security, and other
preferences.

To start the Setup Utility:

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press 

f10

.

– or –

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press 

esc

.

When the Startup Menu is displayed, press 

f10

.

The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press 

f10

.

– or –

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press 

esc

. When the

Startup Menu is displayed, press 

f10

.

Use the arrow keys to select System Configuration > Language, and then press 

enter

.

Use the arrow keys to select a language, and then press 

enter

.

When a confirmation prompt with your language selected is displayed, press 

enter

.

To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press 

enter

.

62

Chapter 5   Setup Utility