HP (Hewlett-Packard) dv9700 ユーザーズマニュアル
Bluetooth module
Description
Spare part number
Bluetooth module (includes Bluetooth module cable)
412766-002
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
)
b.
Optical drive (see
)
c.
Switch cover (see
d.
Keyboard (see
)
e.
Speaker assembly (see
)
f.
Display assembly (see
)
g.
Top cover (see
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable (1) from the system board. The Bluetooth module cable is
included with the Bluetooth module spare part kit and is also included in the Cable Kit, spare part
number 448015-001.
included with the Bluetooth module spare part kit and is also included in the Cable Kit, spare part
number 448015-001.
2.
Route the Bluetooth module cable (2) under the system board.
3.
Remove the two silver Phillips PM2.0×3.0 screws (3) that secure the Bluetooth module to the base
enclosure.
enclosure.
82
Chapter 4 Removal and replacement procedures