HP (Hewlett-Packard) dv9700 ユーザーズマニュアル
6.
If it is necessary to replace the fingerprint reader board cable, release the ZIF connector (1) to
which the cable is connected and disconnect the cable (2) from the system board. The fingerprint
reader board cable is included in the Cable Kit, spare part number 448015-001.
which the cable is connected and disconnect the cable (2) from the system board. The fingerprint
reader board cable is included in the Cable Kit, spare part number 448015-001.
Reverse this procedure to install the ExpressCard assembly and the fingerprint reader board cable.
Top cover trim
Description
Spare part number
Top cover trim
432978-001
Before removing the top cover trim, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
5.
Remove the following components:
a.
b.
Optical drive (see
)
c.
Switch cover (see
d.
Keyboard (see
)
e.
)
f.
Display assembly (see
)
g.
Top cover (see
Component replacement procedures
87