HP (Hewlett-Packard) E1Z80UTABA ユーザーズマニュアル
Front bezel and display panel
Description
Spare part number
Front bezel
733500-001
Assembly kit for non-touchscreen models without a webcam (includes webcam cover for bezel)
733510-001
Assembly kit for touchscreen models without a webcam (includes webcam cover for bezel)
733511-001
Touch panel kit, with integrated touch glass
735208-001
Display panel – non-touchscreen models
735207-001
Plastic frame for models with a webcam (does not include glass)
733507-001
The front bezel is located on the front of the computer and is secured to the main system frame with 18
Torx screws.
Replacement bezels include the webcam shutter and capacitive sensor board. On models that do not
include a webcam, you must remove the shutter and install the webcam cover (Assembly kit) into the
slot in which the webcam would be installed.
Display panels require a backlight cable specific to the manufacturer. Make sure you use the backlight
cable packaged with the display panel.
To remove the front bezel:
1.
).
2.
Prepare the computer for disassembly (see
).
3.
4.
).
5.
Remove the top rear trim (see
6.
Remove the lower rear panel (see
7.
8.
Remove the speakers (see
9.
Remove the power button board (see
10.
Remove the Torx screws that secure the bezel to the main system frame assembly, as follows:
●
18 total screws:
◦
Left: 5 screws
◦
Top: 5 screws
◦
Right 5 screws
◦
Bottom: 3 screw
Front bezel and display panel
97