HP (Hewlett-Packard) E1Z80UTABA ユーザーズマニュアル

Power supply, 200W

733490-001

The power supply is located in the middle of the computer under the VESA mounting plate. It is secured

with two Torx screws and has one connector routed to the system board.

To remove the power supply:

Prepare the computer for disassembly (see 

).

Remove the stand (see 

).

Remove the access panel (see 

).

Remove the lower rear panel (see 

Disconnect the cable from the system board connector (1).

Remove the two Torx screws (2) that secure the power supply to the computer.

86

Chapter 5   Removal and Replacement Procedures All-in One (AIO) Chassis