HP (Hewlett-Packard) E1Z74UT#ABA ユーザーズマニュアル
Removing a 3.5-inch device
CAUTION:
All removable media should be taken out of a drive before removing the drive from the
computer.
1.
Prepare the computer for disassembly (
).
2.
Remove the access panel (
).
3.
Remove the front bezel (
).
4.
Rotate the drive cage to its upright position.
5.
Disconnect the drive cables from the rear of the drive, or, if you are removing a media card
reader, disconnect the USB cable from the system board as indicated in the following illustration.
reader, disconnect the USB cable from the system board as indicated in the following illustration.
6.
Press inward on the release lever at the rear of the drive (1) and slide the drive out of the rear of
the drive bay (2).
the drive bay (2).
102
Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)