HP (Hewlett-Packard) E1Z74UT#ABA ユーザーズマニュアル
Bezel blanks
Description
Spare part number
Optical drive bezel blank
732770-001
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to
be removed before installing a drive. To remove a bezel blank:
be removed before installing a drive. To remove a bezel blank:
1.
Remove the access panel (
2.
Remove the front bezel (
)
3.
Remove the bezel blank for the appropriate drive:
To remove a 5.25-inch bezel blank, press inward on the retaining tabs that hold the bezel
blank in place (1) then pull the bezel blank from the front bezel (2).
blank in place (1) then pull the bezel blank from the front bezel (2).
NOTE:
After removing the 5.25-inch drive bezel blank and installing a drive, you can
install an optional bezel trim piece (available from HP) that surrounds the front of the drive.
Bezel blanks
41