HP (Hewlett-Packard) FL939UT#ABA ユーザーズマニュアル
Installing the front panel I/O cable assembly
To install he front panel I/O cable assembly:
1.
With power removed and the chassis open, guide the front panel I/O cable assembly cables through
the chassis openings from which they were removed.
the chassis openings from which they were removed.
2.
Place the front panel I/O cable assembly in the chassis and slide it up into position as shown in the
following figure . Install the screw
following figure . Install the screw
2
.
Figure 5-18
Installing the front panel I/O cable assembly
3.
Connect the front panel I/O cable assembly cables to the system board as shown in the following
figure.
figure.
Figure 5-19
Connecting the front panel I/O cable assembly cables
Table 5-5
Connecting the front panel I/O cable assembly cables
Item
Description
1
Front audio
2
Front 1394a
3
Front USB
88
Chapter 5 Replacing components
ENWW