HP (Hewlett-Packard) FL939UT#ABA ユーザーズマニュアル
Removing a hard disk drive from the slot load optical bay
1.
2.
Remove the side access panel (see
3.
).
4.
Remove the expansion card support and any card cables that might interfere with slot load
assembly removal.
assembly removal.
5.
Disconnect the optical drive power cable from the chassis power cable, and the optical drive data
cable from the system board (see
cable from the system board (see
).
6.
Disconnect the slot load drive data cable from the system board connector as shown in the following
figure.
figure.
Figure 5-45
Disconnecting the data cable from the system board
7.
Disconnect the chassis power cable from the slot load drive power connector as shown in the
following figure.
following figure.
Figure 5-46
Disconnecting chassis power cable from hard disk drive connector
ENWW
Removing and installing components 111