HP (Hewlett-Packard) FL939UT#ABA ユーザーズマニュアル
Removing a hard disk drive from the optical drive bay
1.
2.
Remove the side access panel (see
3.
).
4.
Remove the expansion card support (see
5.
Disconnect the power and data cables from the rear of the hard drive as shown in the following
figure.
figure.
Figure 5-59
Removing the power and data cables
6.
Lift the drive release latch at the green touch point , and then slide the hard drive carrier from the
chassis as shown in the following figure
chassis as shown in the following figure
2
.
Figure 5-60
Removing the drive from the ODD bay
ENWW
Removing and installing components 119