HP (Hewlett-Packard) FL939UT#ABA ユーザーズマニュアル
Removing a DIMM
1.
CAUTION:
To ensure that DIMMs are not damaged during removal or installation, power off the
workstation and unplug the power cord from the AC power outlet. If you do not unplug the power
cord before installing memory, the modules might be damaged and the workstation will not
recognize the memory changes.
cord before installing memory, the modules might be damaged and the workstation will not
recognize the memory changes.
2.
Remove the side access panel (see
3.
Remove the airflow guide (
).
4.
Remove the memory fans (see
).
5.
Carefully push outward on the memory slot socket levers . Lift the DIMM straight up and out of
its socket
its socket
2
as shown in the following figure.
Store the DIMM in an anti-static bag.
Figure 5-88
Removing a DIMM
140 Chapter 5 Replacing components
ENWW