HP (Hewlett-Packard) FL939UT#ABA ユーザーズマニュアル
Installing a PCIe card
1.
2.
Remove the side access panel (see
3.
Remove the expansion card support (see
4.
Select the desired expansion card slot for the PCIe card. See
for help in selecting a slot.
5.
Raise the rear retention clamp by lifting the metal bar or the green lever as shown in the following
figure .
figure .
Figure 5-95
Removing the slot cover
TIP:
Grasp the slot cover between two fingers—one from the inside of the chassis, and one from
the outside.
6.
Remove the PCI slot cover by pulling it up, out of the chassis
2
.
148 Chapter 5 Replacing components
ENWW