HP (Hewlett-Packard) FL939UT#ABA ユーザーズマニュアル
CPU
This section describes how to remove and install a CPU.
Removing a CPU
1.
2.
Remove the side access panel (see
3.
Remove the expansion card support (see
4.
).
5.
Remove the memory fan assembly (see
).
6.
Remove the CPU heatsink (see
).
7.
Raise the CPU socket lever and open the cover
2
as shown in the following figure.
Figure 5-103
Removing a CPU
CAUTION:
The CPU socket contacts and pads are extremely fragile. Do not touch the CPU
socket contacts or the gold pads underneath the CPU. Use extreme care and handle the CPU only
by the edges.
by the edges.
8.
Pull the CPU straight out of the socket , and store the CPU in a static free container in a safe
place where it cannot be damaged
place where it cannot be damaged
ENWW
Removing and installing components 157