HP (Hewlett-Packard) FL939UT#ABA ユーザーズマニュアル

This section describes how to remove and install the front bezel.

Disconnect power from the workstation (see 

Remove the side access panel (see 

Remove the right side panel (see 

Remove the four T-15 Torx screws  , and then remove the bezel from the chassis as shown in
the following figure 

2

.

  Removing the front bezel

To install the front bezel, position the bezel on the chassis and install the screws.

ENWW

Removing and installing components

85