HP (Hewlett-Packard) 810E ユーザーズマニュアル
13
2 system features
main memory
main memory
There is one 168-pin DIMM slot on the system board for installing main
memory. All HP e-pc models are supplied with a memory module of at least
64 MB non-ECC SDRAM. Only HP memory modules are supported. Memory
upgrades are not supported.
memory. All HP e-pc models are supplied with a memory module of at least
64 MB non-ECC SDRAM. Only HP memory modules are supported. Memory
upgrades are not supported.
processors
The HP e-pc is equipped with either a single Socket 370 Intel Celeron or
socket 370 Intel Pentium III processor. Socket 370 is a conversion of Slot 1
(used previously by Celerons and Pentium Is) to a socket, running at the
same bus protocol as the Pentium II (the GTL+ bus protocol). The processor
is connected to the system board through a Plastic Pin Grid Array (PPGA)
370 Socket. The reduction in size achieved by the Socket 370 Celeron is due
to the integration of the L2 cache on the processor die. Like the Celeron
processor, the Pentium III comes in a 370-pin socket (PGA370) package.
socket 370 Intel Pentium III processor. Socket 370 is a conversion of Slot 1
(used previously by Celerons and Pentium Is) to a socket, running at the
same bus protocol as the Pentium II (the GTL+ bus protocol). The processor
is connected to the system board through a Plastic Pin Grid Array (PPGA)
370 Socket. The reduction in size achieved by the Socket 370 Celeron is due
to the integration of the L2 cache on the processor die. Like the Celeron
processor, the Pentium III comes in a 370-pin socket (PGA370) package.
To find out more about Socket 370 Celeron technology, refer to the Technical
Reference Manual - HP PC Technology.
Reference Manual - HP PC Technology.