HP (Hewlett-Packard) E1Z80UT#ABA ユーザーズマニュアル

mSATA Solid-State Drive

The mSATA SSD is located near the bottom of the system board. The drive is secured with two Phillips

screws.

NOTE:

In the following image, the mSATA SSD is not shown.

To remove the mSATA SSD:

Prepare the computer for disassembly (see

Remove the access panel (see

Remove the two Phillips screws (1) that secure the SSD to the computer.

Lift the SSD to a 45-degree angle, and then pull it away to remove it from the socket (2).

To install the mSATA SSD, reverse the removal procedures.

NOTE:

mSATA SSD are designed with a notch to prevent incorrect insertion.

mSATA Solid-State Drive