HP (Hewlett-Packard) E1Z89UTABA ユーザーズマニュアル
System board and PCI expansion slot daughter card
NOTE:
All system board spare part kits include replacement thermal material.
Description
Spare part number
System board for use in models without Windows 8
696969-001
System board for use in models with Windows 8 Standard
696969-501
System board for use in models with Windows 8 Professional
696969-601
System board for use in models with NetClone
727720-001
HP PCI expansion slot daughter card
696971-001
1.
Prepare the computer for disassembly (
).
2.
Remove the access panel (
3.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules (
●
●
●
Processor (
4.
Disconnect all cables connected to the system board, noting their location for reinstallation.
5.
If a PCI expansion slot daughter card is installed, remove the two Torx T15 screws (1) that secure
the PCI extension board to the chassis.
92
Chapter 5 Removal and replacement procedures: Tower (TWR)