HP (Hewlett-Packard) E1Z89UTABA ユーザーズマニュアル

ページ / 296
Speaker
Description
Spare part number
Speaker
727149-001
The speaker is attached to the front of the chassis under the rotating drive cage.
1.
Prepare the computer for disassembly (
).
2.
Remove the access panel (
3.
Remove the front bezel (
).
4.
Rotate the drive cage to its upright position.
5.
Disconnect the speaker wire from the white system board connector labeled SPKR.
6.
Remove the two Torx screws that secure the speaker to the chassis.
7.
Lift the speaker from the inside of the chassis to remove it.
To install the speaker, reverse the removal procedures.
134
Chapter 6   Removal and replacement procedures: Small Form Factor (SFF)