HP (Hewlett-Packard) E1Z82UT#ABA ユーザーズマニュアル
WLAN module
Description
Spare part number
HP WLAN 802.11 a/b/g/n 2x2 PCIe NIC
695915-001
1.
Prepare the computer for disassembly (
2.
Remove the access panel (
3.
Remove the optical drive (
).
4.
Remove the hard drive (
).
5.
Remove the drive cage (
).
6.
Disconnect the two antenna cables from the connectors on the module (1).
7.
Remove the two Phillips screws (2) that secure the module to the system board.
8.
Lift the module to a 45 degree angle, and then remove the module from the connector by pulling it
away at an angle (3).
To install the WLAN module, reverse the removal procedure. Make sure the antenna cables are
correctly routed.
168
Chapter 7 Removal and replacement procedures: Ultra-slim Desktop (USDT)