HP (Hewlett-Packard) E1Z82UT#ABA ユーザーズマニュアル
Drives
Description
Spare part number
Optical drives
DVD±RW drive
657958-001
DVD-ROM drive
608394-001
Blu-ray BD-RW SuperMulti XL Drive
719157-001
Hard drives
2 TB, 7200 rpm hard drive
616608-001
1 TB hard drive, hybrid SSD
724937-001
1 TB, 10000 rpm hard drive
719106-001
1 TB, 7200 rpm hard drive
613202-001
750 GB, 7200 rpm, 2.5-inch hard drive, hybrid SSD
719105-001
500 GB, 10000 rpm hard drive
683923-001
500 GB, 7200 rpm, 2.5-inch hard drive, self-encrypting (SED)
696442-001
500 GB, 7200 rpm hard drive
696442-001
500 GB hard drive, hybrid SSD
724938-001
256 GB Solid State Drive (SSD), self-encrypting (SED)
680020-001
128 GB Solid State Drive (SSD)
665961-001
32 GB mSATA drive
686616-001
When installing drives, follow these guidelines:
●
The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA
connector on the system board labeled SATA0.
●
Connect secondary hard drives and optical drives to any of the light blue SATA connectors on the
system board (labeled SATA1, SATA2, SATA3, and SATA5).
●
Connect a media card reader USB 3.0 cable to the USB connector on the system board labeled
MEDIA3.0.
●
The power cable for the drives has two branches coming off the system board connector. The first
branch is a three-headed cable with the first connector routed to the 5.25-inch bay, the second
connector routed to the 3.5-inch bay, and the third (two-wire) connector routed to the slim optical
drive bay. The second branch is a three-headed cable with the first connector routed to the bottom
2.5-inch hard drive bay, the second connector routed to the middle 3.5-inch hard drive bay, and
the third connector routed to the top 3.5-inch hard drive bay.
●
You must install guide screws to ensure the drive will line up correctly in the drive cage and lock in
place. HP has provided extra guide screws (four 6-32 silver and blue isolation mounting guide
Drives
59