HP (Hewlett-Packard) H2D81US ユーザーズマニュアル

This section provides information about replicating the workstation setup.

A setup configuration is model-specific. File system corruption can result if source and

target workstations are not the same model.

To copy a setup configuration:

Select a setup configuration to copy, and then restart the workstation.

As soon as the workstation powers on, press and hold 

F10

 until you enter the Computer Setup

(F10) Utility. If necessary, press 

Enter

 to bypass the title screen.

If you do not press 

F10

 at the appropriate time, you must restart the workstation, and then

press and hold 

F10

 again to access the utility.

If you are using a PS/2 keyboard, you might see a keyboard error message. Disregard it.

Select File>Replicated Setup>Save to Removable Media. Follow the instructions on the screen
to create the configuration diskette or USB media device.

Power off the workstation you are configuring and insert the configuration diskette into the diskette
drive or USB media device.

Power on the workstation you are configuring.

Press and hold the 

F10

 key until you enter the Computer Setup (F10) Utility. If necessary, press

Enter

 to bypass the title screen.

Select File>Replicated Setup>Restore from Removable Media, and then follow the instructions
on the screen.

Restart the workstation when the configuration is complete.

ENWW

Workstation management

41