HP (Hewlett-Packard) A2W54UT#ABA ユーザーズマニュアル

Power switch/LED assembly

646820-001

The power switch assembly is mounted to the front of the chassis and removed by pulling it away from

the chassis.

Prepare the computer for disassembly (

).

Remove the computer access panel (

).

Remove the computer access panel (

Disconnect the cable from the black system board connector labeled PB/LED.

Press downward on the tabs (1) at the top of the assembly.

Rotate the top of the assembly downward (2), and then pull it away from the chassis while

threading the wires through the hole in the front of the chassis.

  Removing the power switch assembly

To install the power switch assembly, reverse the removal procedure.

112

Chapter 6   Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis