HP (Hewlett-Packard) A2W54UT#ABA ユーザーズマニュアル
Power Switch/LED Assembly
Description
Spare part number
Power switch/LED assembly
646828-001
1.
Prepare the computer for disassembly (
).
2.
Remove the access panel (
).
3.
Remove the front bezel (
).
4.
Remove the front fan (
).
5.
Disconnect the cable from the system board connector labeled PB/LED.
6.
With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage
the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to remove it
from the chassis.
Figure 7-30
Removing the power switch/LED
7.
Pull the assembly away from the chassis while threading the cable through the hole in front of the
chassis.
156
Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis