HP (Hewlett-Packard) A2W54UT#ABA ユーザーズマニュアル
10.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
11.
Replace the computer access panel.
12.
If the computer was on a stand, replace the stand.
13.
Reconnect the power cord and turn on the computer.
14.
Lock any security devices that were disengaged when the access panel was removed.
15.
Reconfigure the computer, if necessary.
System Board Connections
Refer to the following illustration and table to identify the system board connectors for your model.
Figure 8-11
8200 Elite Series system board connections
Table 8-1
8200 Elite Series system board connections
No. System Board Connector
System Board Label Color
Component
1
DIMM4 (Channel A)
DIMM4
white
Memory Module
2
DIMM3 (Channel A)
DIMM3
black
Memory Module
3
DIMM2 (Channel B)
DIMM2
white
Memory Module
4
DIMM1 (Channel B)
DIMM1
black
Memory Module
5
Power
SATAPWR0
black
SATA Optical Drives
6
Power
SATAPWR1
black
SATA Hard Drives
7
SATA 3.0
SATA0
dark blue
1st Hard Drive
8
SATA 3.0
SATA1
light blue
2nd Hard Drive, or 2nd Optical
Drive if an ESATA Adapter Cable
exists
Drive if an ESATA Adapter Cable
exists
9
SATA 2.0
SATA2
white
1st Optical Drive
180
Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis