HP (Hewlett-Packard) A2W54UT#ABA ユーザーズマニュアル
TV Tuner or WLAN Module
The procedure to remove and replace the TV tuner module and the WLAN module are similar. The
image in this section illustrates a TV tuner module. Use the same basic procedure the remove a WLAN
module.
Description
Spare part number
HP TV Tuner Kit (includes hardware)
613990-001
802.11a/b/g/n WLAN module
631954-001
1.
Prepare the computer for disassembly (
2.
Remove the computer access panel (
).
3.
Remove the optical drive (
4.
Remove the hard drive (
).
5.
Remove the optical drive rail (
6.
Remove the heat sink (
).
7.
Disconnect the antenna cable from the connector on the module (1).
8.
Remove the two screws (2) that secure the module to the system board.
Figure 9-27
Removing the TV tuner module
9.
Lift the module to a 45 degree angle, and then remove the module from the connector by pulling it
away at an angle.
236
Chapter 9 Removal and Replacement Procedures – Ultra-Slim Desktop (USDT) Chassis