HP (Hewlett-Packard) A2W54UT#ABA ユーザーズマニュアル

●

Keep cables clear of sliding or moveable parts to prevent them from being cut or crimped when

the parts are moved.

●

When folding a flat ribbon cable, never fold to a sharp crease. Sharp creases may damage the

wires.

●

Some flat ribbon cables come prefolded. Never change the folds on these cables.

●

Do not bend any cable sharply. A sharp bend can break the internal wires.

●

Never bend a SATA data cable tighter than a 30 mm (1.18 in) radius.

●

Never crease a SATA data cable.

●

Do not rely on components like the drive cage, power supply, or computer cover to push cables

down into the chassis. Always position the cables to lay properly by themselves.

The combination of the file system and the operating system used in the computer determines the

maximum usable size of a drive partition. A drive partition is the largest segment of a drive that may be

properly accessed by the operating system. A single hard drive may therefore be subdivided into a

number of unique drive partitions in order to make use of all of its space.

Because of the differences in the way that drive sizes are calculated, the size reported by the operating

system may differ from that marked on the hard drive or listed in the computer specification. Drive size

calculations by drive manufacturers are bytes to the base 10 while calculations by Microsoft are bytes

to the base 2.

 

FAT 32

ATA

Windows XP/Windows Vista/Windows 7 32 GB

2 TB

NTFS

ATA

Windows XP/Windows Vista/Windows 7 2 TB

2 TB

70

Chapter 4   Routine Care, SATA Drive Guidelines, and Disassembly Preparation