Aspire Digital 3810TZG ユーザーズマニュアル

Chapter 2

The table below describes the parameters in this screen.

BIOS Flash Utility

The BIOS flash memory update is required for the following conditions:

‰

New versions of system programs

‰

New features or options

‰

Restore a BIOS when it becomes corrupted. 

Use the Phlash utility to update the system BIOS flash ROM.

NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery 

Diskette before you use the Phlash utility.

NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.

NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not 

contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not 
completely loaded. 

Fellow the steps below to run the Phlash.

1. Prepare a bootable diskette.

2. Copy the flash utilities to the bootable diskette.

3. Then boot the system from the bootable diskette. The flash utility has auto-execution function.

Exit Saving Changes

Exit System Setup and save your changes to CMOS.

Exit Discarding 
Changes

Exit utility without saving setup data to CMOS.

Load Setup Default

Load default values for all SETUP item.

Discard Changes

Load previous values from CMOS for all SETUP items.

Save Changes

Save Setup Data to CMOS.