HP (Hewlett-Packard) A1356A ユーザーズマニュアル

 

HP UPS Management Module web interface  41 

HP UPS Management Module web interface 

HP UPS Management Module web interface 

overview 

The web interface graphically displays various measurements and warning and alarm messages from the 

management module. Also, system values and power fail settings can be configured through the web 

interface and sent to the management module. 

  

 

NOTE:

  All status information and configuration parameters included on the HP UPS 

Management Module web interface are available using the HP UPS Management Module 

Service Menu (on page 

  

 

Accessing the web interface 

You can access the web interface: 

•

 

Remotely through a Web browser (on page 

•

 

Locally from the system tray icon (on page 

) in Windows® 

 

Web browser 

Use a web browser to access the HP UPS Management Module web interface:  

1. 

If necessary, configure the management module by: 

a. 

Launching a terminal emulation program (on page 

). 

b. 

Configuring the management module for remote access (on page 

2. 

Be sure that you have connected the network cable ("

the management module. 

3. 

Press the Reset button on the management module front panel. The management module discovers 
attached UPSs. 

4. 

Launch a supported browser. The browser window appears. 

5. 

In the Address field (Microsoft Internet Explorer) or the Location field (Mozilla, Firefox, and 
SeaMonkey), enter one of the following: 

http://

 

https://

where xxx.xxx.xxx.xxx is the IP address of the management module. The log in screen appears. 

6. 

Sign in through the web browser ("