HP (Hewlett-Packard) R1500 ユーザーズマニュアル

Installation 20 

Powering up the UPS 

Press and hold the Power On/Standby button (1) until the UPS beeps. The Power On, Load 1 and Load 2 
LEDs illuminate, indicating that power is available at the UPS output receptacles. 

 

 

Charging the UPS batteries 

With the UPS in Standby mode (on page 

), allow the batteries to charge before putting the UPS into 

service. 

  IMPORTANT:  Charge the batteries for at least 24 hours before supplying backup power to devices. The 

batteries charge to: 

•

  90% of their capacity within 4 hours 

•

  100% of their capacity within 24 hours