HP (Hewlett-Packard) R1500 ユーザーズマニュアル

Maintenance 27 

Remove the battery bracket. 

 

Remove the UPS battery modules. 

  IMPORTANT:  Do not pull the battery leads when removing or installing the batteries. 

 

To replace the component, reverse the removal procedure. 

  IMPORTANT:  Charge the batteries for at least 24 hours before supplying backup power to devices. The 

batteries charge to: 

•

  90% of their capacity within 4 hours 

•

  100% of their capacity within 24 hours 

 

Testing the new battery module 

After installing the new battery module, press the Test/Alarm Reset button. For information on initiating a 
self-test, see "Initiating a self-test (on page 

  IMPORTANT:  The UPS does not execute a self-test until the batteries are 90 percent charged.