Samsung SER-6500 ユーザーズマニュアル

                                                                                                                                                                                
2

SAMSUNG SER6500/40 PROGRAMMING & OPERATING MANUAL

1. Using a new roll of paper, unroll the paper about

150mm and fold the paper as shown in the right
figure.

2. Insert folded paper into the chute (-) of the

ERP300V printer. While holding the lever (¬) down,
pull the paper out until the fold point (®) is
completely out of the printer. And turn the knob
(¯)counterclockwise.

3. Cut the receipt paper.

4. Insert the journal paper into the slit (®) of the rewind

spindle. Wind the spindle three or four times.

5. Push end disk (¯) onto the spindle as shown in the

right figure.

6. Insert the spool to the printer part (°).
7. when the journal paper is loose, rewind the spindle to

tighten the paper.