Cobalt Networks 8321(-C) ユーザーズマニュアル

••••

The SMPTE 269M Fault Reporting connection on openGear

TM

 8310 series frames is provided by the

FAULT BNC connector, for interfacing with a customer-designed alarm system.

The fault report contacts are closed when the card detects an internal failure or a power loss condition.
The fault report contacts are closed for about 2 milliseconds every 16 ms to report any error for which
SMPTE fault reporting has been enabled.

Some internal failures may include:

•

 

Hardware failure of any card or power supply.

•

 

Loss of AC power to any power supply

•

 

“Soft” errors from any card setup to detect and report such errors

For additional information on alarm system design, refer to the SMPTE document ANSI/SMPTE
269M - 1999.