American Power Conversion 200/208 V ユーザーズマニュアル
6
Smart-UPS® VT 10-30kVA, 200/208V and XR Battery Enclosure Operation Guide
990-2359A
The Display
Introduction
The four LEDs to the left of the display indicate the operational status of the UPS. The five
navigation keys to the right are used to select and open menu items, to access information, change
system parameters, and to launch context-sensitive help.
navigation keys to the right are used to select and open menu items, to access information, change
system parameters, and to launch context-sensitive help.
LOAD ON
When the green LED is on, the UPS provides power to the load equipment.
ON BATT
When the yellow LED is on, power to the load flows from the batteries to the
Power Module.
Power Module.
BYPASS
When the yellow LED is on, power to the load is supplied through the static
bypass switch or mechanical bypass.
bypass switch or mechanical bypass.
FAULT
When the red LED is on, a fault condition exists.
LCD Screen
Displays alarms, status data, instructional help, and configuration items.
UP and DOWN
navigation keys
navigation keys
Selects menu items and accesses information.
HELP key
Launches context-sensitive help.
ENTER key
Opens menu items and enters input changes to system parameters.
ESC key
Returns to previous screen displayed.
NOTE!
The display provides access to more functions than described in this manual. Those
functions should not be accessed without the assistance of APC Customer Support in
order to avoid unwanted load impacts. For APC World-wide Customer Support, refer to
rear cover of this manual.
The display provides access to more functions than described in this manual. Those
functions should not be accessed without the assistance of APC Customer Support in
order to avoid unwanted load impacts. For APC World-wide Customer Support, refer to
rear cover of this manual.
Chrg 100%
Load 000%
120Vin 000Vout 60Hz
Runtime: 00hr 30m
LOAD ON
ON BATT
BYPASS
FAULT