AEG PROTECT 1.11 ユーザーズマニュアル
57
10
Maintenance
The PROTECT 1. consists of state-of-the-art, non-wearing
components. We do, however, recommend visual checks
(above all battery and fan checks) at regular intervals (at least
every 6 months) to maintain continuous availability and
operational reliability.
components. We do, however, recommend visual checks
(above all battery and fan checks) at regular intervals (at least
every 6 months) to maintain continuous availability and
operational reliability.
CAUTION!
Ensure that the work area is cordoned off and
always observe the safety instructions!
Ensure that the work area is cordoned off and
always observe the safety instructions!
10.1
Charging the Battery
The battery is automatically charged when the mains is
connected, irrespective of the operating mode. This is
signalled by the Load LED’s lighting up (see also chapter
4.4.2).
connected, irrespective of the operating mode. This is
signalled by the Load LED’s lighting up (see also chapter
4.4.2).
The complete charging time of the battery after a long
discharge time depends especially on the number of
additional external battery units (see chapter 2.3).
discharge time depends especially on the number of
additional external battery units (see chapter 2.3).
10.2
Checks
The following maintenance work should be performed:
Task
Interval
Described in
Visual check
6 months
Chapter 10.2.1
Battery/fan check
6 months
Chapter 0 / 0
10.2.1
Visual Check
When visually inspecting the unit, check whether …
♦
there is any mechanical damage or foreign bodies can
be found in the system,
be found in the system,
♦
any conductive dirt or dust has accumulated in the unit,
♦
accumulation of dust affects heat supply and
dissipation.
dissipation.