Mitsubishi Electronics FR-A5AR ユーザーズマニュアル

A-2

2. Injury Prevention

3. Additional instructions

Also note the following points to prevent an accidental failure, injury, electric shock, etc.:

(1) Transportation and mounting

(2) Test operation and adjustment

Any person who is involved in the wiring or inspection of this equipment should be fully competent to do the work.

Always install the option unit before wiring. Otherwise, you may get an electric shock or be injured.

Handle this option unit with dry hands to prevent an electric shock.

Do not subject the cables to scratches, excessive stress, heavy loads or pinching. Otherwise, you may get an electric shock.

Apply only the voltage specified in the instruction manual to each terminal to prevent burst, damage, etc.

Ensure that the cables are connected to the correct terminals. Otherwise, burst, damage, etc. may occur.

Always make sure that polarity is correct to prevent burst, damage, etc.

While power is on or for some time after power-off, do not touch the inverter as it is hot and you may get burnt.

Do not install or operate the option unit if it is damaged or has parts missing.

Do not stand or rest heavy objects on the product.

Check that the mounting orientation is correct.

Prevent screws, metal fragments or other conductive bodies or oil or other flammable substance from entering the inverter.

Before starting operation, confirm and adjust the parameters. A failure to do so may cause some machines to
make unexpected motions.

WARNING

CAUTION

ib66810b.book 2 ページ２００２年２月１５日　金曜日　午前８時１０分

Technologies Inc.

Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com