Toshiba 225 ユーザーズマニュアル
Before Calling Service Technician 199
Original/Copy paper-related items
Image trouble
Phenomenon
Usual cause
Countermeasure
An original jams.
An original not acceptable for
the equipment is being used.
the equipment is being used.
Copy paper jams.
Copy paper not acceptable
for the equipment is being
used.
for the equipment is being
used.
The size of the copy paper in
the drawer or on the bypass
tray is not registered prop-
erly in the equipment.
the drawer or on the bypass
tray is not registered prop-
erly in the equipment.
Jammed paper is located in
a place you cannot see eas-
ily.
a place you cannot see eas-
ily.
There is no gap between the
side guides and paper in the
drawer. Or the gap is too
wide.
side guides and paper in the
drawer. Or the gap is too
wide.
There is a gap between the
paper and the end guide in
the drawer.
paper and the end guide in
the drawer.
Multiple feeding occurs.
Paper is clinging to each
other.
other.
Fan the paper well and place it again.
Phenomenon
Usual cause
Countermeasure
The density of the copy
image is light.
image is light.
Toner has run out.
“Toner empty” appears on the display
when toner has run out. Replace the toner
cartridge if the message appears.
when toner has run out. Replace the toner
cartridge if the message appears.
The copy density is set
lighter.
lighter.
Make the density darker if you use the
manual copy density mode. Or use the
automatic copy density mode.
manual copy density mode. Or use the
automatic copy density mode.
The transfer charger wire is
dirty.
dirty.
The density of the copy
image is dark.
image is dark.
The copy density is set
darker.
darker.
Make the density lighter if you use the
manual copy density mode. Or use the
automatic copy density mode.
manual copy density mode. Or use the
automatic copy density mode.