Tripp Lite SMART1500RM2U ユーザーズマニュアル
SMART 1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during
brownouts and overvoltages, plus network grade AC surge suppression
1500VA/1000 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking,
telecom and other sensitive electronic devices
Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional
2POSTRMKITWM accessory, upright tower installation supported with optional 2-9USTAND accessory
Large internal batteries offer runtimes of 19 minutes at half load (750VA/500 watts) and 7 minutes at full load (1500VA/1000 watts)
Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,
event logging and running user-defined script commands
Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional
SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software.
Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage,
DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for a delayed or immediate
reboot of connected devices
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating
systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires
optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
Two year warranty with $250,000
Specifications
SYSTEM OVERVIEW
Voltage compatibility
120V AC
Frequency
compatibility
compatibility
60 Hz
OUTPUT
Output VA
1500
Output watts
1000
Output nominal
voltage
voltage
120V AC
Output voltage
regulation
regulation
LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC
Output frequency
regulation
regulation
LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
Outlet quantity / type
8 NEMA 5-15R
Customized load
management
receptacles
management
receptacles
"Includes 2 load banks, each with 2 outlets that support load shedding and remote reboot on demand of locked network
devices. Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for
servers and other critical devices. "
devices. Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for
servers and other critical devices. "
Overload protection
15A input breaker
INPUT
Maximum input
amps
amps
10.4A / 1110 watts
Input connection
type
type
NEMA 5-15P
Input cord length
10 ft., 14 gauge