Marantz Model VP-10S1 ユーザーズマニュアル
33
ENGLISH
– Reset All
Resets all settings to their factory defaults except the user-selected gamma curve and the lamp life counter. When you select
“Yes”, the following message appears on the screen.
“Yes”, the following message appears on the screen.
Select “Yes” and press the ENTER button.
❖
How to Operate the Config Menu
1.
Select the desired menu item and press the
2
button.
The setting item will appear on the screen.
2.
Use the
3
and
4
buttons to set the item.
3.
Press the
1
button to enter the setting and return to menu item selection.
You can turn the trigger signal output from the TRIG. 2 jack on (12 V output)/off (no output) for each of the aspect modes: Full,
Normal, Zoom and Through. This trigger signal can be used to automatically match the screen aspect mode to projector operation,
though it requires a powered dual aspect screen.
Normal, Zoom and Through. This trigger signal can be used to automatically match the screen aspect mode to projector operation,
though it requires a powered dual aspect screen.
On: 12 V output
Off: No output
Off: No output
❖
How to Operate the Trigger 2 Menu
1.
Select the desired menu item and press the
2
button.
The setting item will appear on the screen.
2.
Use the
3
and
4
buttons to set the item.
3.
Press the
1
button to enter the setting and return to menu item selection.
INPUT
ASPECT
MENU
V-MUTE
ENTER
2.
1, 3
INPUT
PATTERN
ENTER
2
1,3
Picture Adjust
Setting
Display
System
Config
Trigger 2
Preset
Full
Normal
Through
Zoom
On
On
On
On
Menu
Standard 1
Trigger 2
INPUT
ASPECT
MENU
V-MUTE
ENTER
2.
1, 3
INPUT
PATTERN
ENTER
2
1,3
Yes
No
Reset All ?