Panasonic PT-L795U ユーザーズマニュアル
Adjusting the picture to the desired setting
You can adjust the picture settings for any of the input signal sources selected according to the procedure on page 20.
The items which can be adjusted vary depending on the type of input signal. The adjustment procedure below
describes the on-screen displays when a signal is being input to the S-VIDEO IN terminal or the VIDEO IN terminal.
The items which can be adjusted vary depending on the type of input signal. The adjustment procedure below
describes the on-screen displays when a signal is being input to the S-VIDEO IN terminal or the VIDEO IN terminal.
Adjustment procedure <for the COLOR setting>
1. Press the MENU button to display the MENU screen.
2. Press the “
2. Press the “
” and “
” buttons to select “PICTURE”.
3. Press the ENTER button to display the PICTURE screen.
4. Press the “
4. Press the “
” and “
” buttons to select “COLOR”.
5. Press the ENTER, “
” or “
” button to display the COLOR individual
adjustment screen.
6. Continue pressing the “
” and “
” buttons to adjust the color. The current
setting will be displayed on the screen by numerals and a bar.
The adjustment operation and the changes made will vary depending on
which adjustment item is selected. Refer to the table below for details.
which adjustment item is selected. Refer to the table below for details.
Adjustment function display
Numeric adjustment level display
Bar display
Adjustment Item
Button
Adjustment Details
Adjustment Range
Remarks
COLOR
Press the “
” button.
The color becomes darker.
Max. value 63
Press the “
” button.
The color becomes lighter.
Min. value 0
S-VIDEO/VIDEO only
TINT
Press the “
” button.
Flesh tones become greenish.
Max. value 63 NTSC, NTSC 4.43 (S-
Press the “
” button.
Flesh tones become reddish.
Min. value 0
VIDEO/VIDEO)only
BRIGHT
Press the “
” button.
The screen becomes brighter.
Max. value 63
Press the “
” button.
The screen becomes darker.
Min. value 0
Press the “
” button.
The screen becomes brighter
CONTRAST
and the picture becomes darker.
Max. value 63
Press the “
” button.
The screen becomes darker and Min. value 0
the picture becomes lighter.
SHARPNESS
Press the “
” button.
The picture quality becomes sharper.
Max. value 3
Press the “
” button.
The picture quality becomes softer.
Min. value 0
S-VIDEO/VIDEO only
NOTE:
lf no button is pressed for approximately 5 seconds while an individual adjustment screen is being displayed,
the display will return to the PICTURE screen.
If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if
it is already being displayed.
Refer to page 22 for details on the TV-SYSTEM settings which appear in the PICTURE screen, and to page 24
it is already being displayed.
Refer to page 22 for details on the TV-SYSTEM settings which appear in the PICTURE screen, and to page 24
for the PICTURE MODE settings.
Refer to the next page for details on adjustment of the WHITE BALANCE R/G/B (W-BAL-R/G/B) settings which
appear when RGB signals are being input and the PICTURE screen is being displayed.
appear when RGB signals are being input and the PICTURE screen is being displayed.
25