ADC MM701G ユーザーズマニュアル

ページ / 168
 
Appendix A: Accessing the Command-Line Interface
MM701G and MM702G User Manual
119
Configure G.shdsl Parameters
You can complete either a quick configuration or an advanced configuration for the G.shdsl line 
parameters. The following sections provide procedures for each configuration type.
Complete a Quick Configuration
1
From the 
G.SHDSL Menu
, enter 
2
 to display the 
G.SHDSL Quick Configuration 
menu. 
2
Configure the following parameters as directed by your service provider:
Operating Mode
Type 
1
 then select 
1
 for 
Remote
 and 
2
 for 
Central-Office
.
When the modem is connected to a service provider through a DSLAM, the operating 
mode is 
Remote
 (default setting). When two modems are used in a point-to-point 
application (LAN extension, for example), one modem at the customer or user site is 
set to 
Remote,
 and the second modem in the CO or wiring closet is set to 
Central-Office
For instruction on setting up G.shdsl parameters and other related parameters for a 
point-to-point modem application, go to Chapter 7, “Implementing a Point-to-Point 
LAN Extension.”