ADC MM701G ユーザーズマニュアル

Configure the G.shdsl parameters for the modem to facilitate it 
synchronizing with either a DSLAM or another modem to which it 
attaches.

Select 

on the menu bar, then select 

under 

.

Configure the following parameters as directed by your service provider:

Operating Mode

When the modem is connected to a service provider through a DSLAM, the operating 
mode is 

 (default setting).

When two modems are used in a point-to-point application (LAN extension, for 
example), one modem at the customer or user site is set to 

 and the second 

modem in the CO or wiring closet is set to 

. For instruction on setting up 

G.shdsl parameters and other related parameters for a point-to-point modem 
application, go to 

Standard Annex

Determines the transmission standards to which this G.shdsl connection will comply. 
The Annex standard should be the same at both ends of the connection. Select one of 
the following Annexes:

 for operating conditions typically found in the North American 

implementation of G.shdsl

Advance Configuration

DSL