Accton Technology 12mi SNMP ユーザーズマニュアル

The current settings for the extender module are displayed in
the status field.  Menu selections are briefly described in the
following table.

Command

Set duplex

Press “d” to set the transmission mode to half-duplex, full-duplex or auto-
negotiation.  All Fast EtherHubs are set to auto-negotiation when powered up.
Any changes to transmission mode will be lost if the power to the hub is reset.

Set forward mode

Press “f” to set the frame forwarding mode to adaptive cut-through or store &
forward.

Set back pressure

Press “b” to enable or disable back pressure.

Return to Main Menu

Press “r” to return to the Main Menu.